Just attach a standard garden hose and plug in the pump. Starting and stopping is completely automatic. The pump will continuously monitor the water level on the cover and when enough water enters the bottom of the pump, the pump turns on and removes it. The pump also features freeze protection, so ice will not hurt it. You can leave it on all winter long. Use it wherever standing water accumulates. For water applications only.
Rule Automatic Pool Cover Pumps turn on and check for water approximately every 1-1/2 minutes. During this "check", the pump runs for about one second and checks for resistance or drag against the impeller. If resistance (water) is found, it will run for as long as water is present. When all the water is pumped out, the pump shuts off and returns to its 2-1/2 minute test cycle. The pump can be started at any time by disconnecting it from the power source, waiting for 5 seconds and reconnecting to the power source.
May also be used to drain pools, spas, basements, and any standing water.
1800 Gallons Per Hour
Install easily with your garden hose
Patent pending Wide Strainer Base - protects against jamming by leaves and debris and keeps the pump upright.
Freeze Protection - leave it on the cover all winter long with no damage to the pump
Extra long 24' power cord
Fully submersible in fresh water
Low Power Consumption - only 100 watts.
3 year warranty
Made In USA